Product Line

Two-channel temperature controllers TC524 | TC424

TC524SP
  • programmable On/Off or PID two-channel controllers
  • range:  -199 ºC to 999 ºC
  • ramp function (gradual heating on both channels)
  • 32 alarm modes
  • 3 relay outputs - "heating", ch1 and ch2, "alarm"
  • sensor - thermocouples (J, K) or thermoresistors (Pt100)
  • full auto-tuning for both PID regulators
  • non-volatile memory for parameters (EEPROM)
  • dimension:  48x96x120 mm (TC524) | 96x48x120 mm (TC424)
  • supply voltage: 220 VAC, 48-62 Hz
  • TCx24SP - standard model
  • TCx24IP - additional RS485 interface

                                    TC424SP

user's manual


Temperature controllers TC504 | TC404

TC504SP
  • programmable On/Off and PID control modes
  • range:  -199 ºC to 999 ºC
  • ramp function (gradual heating/cooling)
  • continuous heater current measurement and burnout detection
  • 64 alarm modes
  • 3 relay outputs - "heating", "cooling" and "alarm"
  • sensor - thermocouples (J, K) or thermoresistors (Pt100)
  • full auto-tuning for both PID regulators
  • non-volatile memory for parameters (EEPROM)
  • dimension:  48x96x120 mm (TC504) | 96x48x120 mm (TC404)
  • supply voltage: 220 VAC, 48-62 Hz
  • TCx04SP - standard model
  • TCx04IP - additional RS485 interface
  • TCx04TP - programmable cycle of 50 segments for the set value (SV)

                                    TC404SP

user's manual


Temperature controller TC103

 

TC103SP
  • programmable PID control mode
  • range:  -199 ºC to 1399 ºC (1800 for type R)
  • ramp function (gradual preheating)
  • 32 alarm modes
  • 3 relay outputs - "heating", "cooling" and "alarm"
  • sensor - thermocouples (J, K, R) or thermoresistors (Pt100)
  • full auto-tuning for both PID regulators
  • non-volatile memory for parameters (EEPROM)
  • dimension:  96x96x65 mm
  • supply voltage: 220 VAC, 48-62 Hz
  • TC103SP - standard model
  • TC103TP - programmable cycle of 50 segments for the set value (SV)
 

user's manual

Temperature controllers TC01 | TC101

TC01

TC101
  • programmable On/Off or 2-position PID control modes
  • range:  -199 ºC to 1800 ºC
  • ramp function (gradual heating)
  • 16 alarm modes (TC101 only)
  • relay outputs - "heating" and "alarm" (TC101 only)
  • sensor - thermocouples (J, K) or thermoresistors (Pt100)
  • full auto-tuning for PID regulator (SP series only)
  • non-volatile memory for parameters (EEPROM)
  • dimension:  96x48 mm (TC101) | 48x48 mm (TC01)
  • supply voltage: 220 VAC, 48-62 Hz
  • TCx01LP - low cost series, On/Off control only
  • TCx01SP - standard series, both PID and On/Off control

 user's manual


Digital thermometers TRM03P | TRM103P

TRM03P
  • three digit floating point LED display
  • sensor - thermoresistors (Pt100)
  • adaptive algorithm for temperature readings
  • dimension:  96x48 mm (TRM103P) | 48x48 mm (TRM03P)
  • supply voltage: 220 VAC, 48-62 Hz

 user's manual

                           TRM103P


Programmable controllers with analog inputs and outputs VPC4030A84 | VPC3224A64 | VPC 108A42

 

VPC3224A64
  • 10 up to 40 optoisolated input lines NPN 24VDC/10mA
  • 8 up to 30 optoisolated output lines 24VDC/2A max.
  • 4 up to 8 analog input lines 0-20mA/0-10V
  • 2 up to 4 analog output lines 0-20mA/0-10V
  • interface for remote programming - Modbus RTU on RS 232 C
  • MS Windows™ programming environment  VPC Host Interface with mnemonic instructions or ladder diagrams
  • inbuilt console with keyboard and LCD display
  • non-volatile program memory for 2048 lines
  • voltage supply: 220 VAC, 48-62 Hz

     user's manual


Programmable controllers VPC4030 | VPC3224 | VPC2416 | VPC 1812 | VPC1410 | VPC106

 

VPC106
  • 10 up to 40 optoisolated input lines NPN 24VDC/10mA
  • 6 up to 30 optoisolated output lines 24VDC/2A max.
  • interface for remote programming - Modbus RTU on RS 232 C
  • MS Windows™ programming environment  VPC Host Interface with mnemonic instructions or ladder diagrams
  • inbuilt console with keyboard and LCD display
  • non-volatile program memory for 2048 lines
  • voltage supply: 220 VAC, 48-62 Hz

     user's manual


Programmable controllers VPC128 | VPC105 | VPC64

VPC105

VPC64
  • 12/10/6  optoisolated input lines NPN 24VDC/10mA
  • 8/5/4 optoisolated output lines 24VDC/2A max.
  • interface for remote programming - RS232C
  • MS Windows™ programming environment  VPC Host Interface with mnemonic instructions or ladder diagrams
  • inbuilt console with keyboard and LED display
  • non-volatile program memory for 1000 lines
  • dimensions: 190x90x60 mm | 180x85x60 mm | 180x85x60 mm
  • voltage supply: 220 VAC, 48-62 Hz

                  VPC128
user's manual


Programming console PRC02 | PRC204 | PRC304

PRC204
  • two optoisolated input lines NPN 24VDC/10mA
  • 12 bit D/A output
  • memory for 10 programs x 12 heating zones
  • interface RS232-C to PCN3xx or PC
  • keyboard and LCD - 4 lines with 20 chars. | 2 lines with 16 chars.
  • non-volatile program memory for different parameters
  • dimensions: 180x85x60 mm | 145x70x60 mm
  • voltage supply: 220 VAC, 48-62 Hz
user's manual


Power controller PCN308 | PCN309 | PCN310

PCN308
  • digital power regulator for heating of PET plastic preforms
  • 8, 9 or 10 programmable zones with control value from 0.0 to 99.9 % of the nominal power
  • advanced adaptive algorithm for power stabilization
  • nominal power up to 8 kW per zone for IR lamps
  • voltage supply: 220V "star" or 380V "delta"
  • interface RS232-C to PRC204, Modbus RTU RS232C/RS485 to HMI or PC
  • non-volatile program memory for the control values


Power controller PCN101

PCN101SP
  • thermocontrol with no feedback from sensors (themocouples or thermoresistors)
  • adaptive algorithm to stabilize power
  • galvanically isolated output for thyristors control
  • non-volatile program memory for different parameters
  • dimensions: 48x96 mm
  • voltage supply: 220 VAC, 48-62 Hz
  • USAGE: heating nozzles of molds etc.

user's manual


Programmable controllers PCN101ZP и PCN102ZP

PCN102ZP
  • welding control in press welders
  • one or two independant channels with starting input and relay output for pressing
  • adaptive algorithm to stabilize power
  • galvanically isolated output for thyristors control
  • non-volatile program memory for different parameters
  • dimensions: 48x96 mm
  • voltage supply: 220 VAC, 48-62 Hz
  • USAGE: mono- or bi-phase press welders etc.

user's manual


Thyristor drives DC3FAxxN for non-reverse DC motors

DC3FA-25N
  • analog control over armature voltage or field current
  • monitoring and detection of alarm situations
  • options for tachogenerator feed back or armature voltage
  • independent from phase sequence
  • independent from the polarity of the tachogenerator
  • visualization on three digit LED display

 

user's manual

Nominal armature current

20 A

50 A

100 A

160 A

200 A

250 A

300 A

400 A

500 A

600 A

800 A

Field current, max.

6 A

10 A

10 A

16 A

16 A

16 A

16 A

25 A

25 A

25 A

25 A

Dimensions, mm.                 L

260

320

380

440

480

500

540

600

650

800

1600

W

180

220

220

280

320

350

350

400

450

500

600

H

150

170

170

200

260

280

280

320

380

420

600

Armature voltage

 0-400 V

Voltage supply

3x380 V

Alarms

 FL PF TG OC OS OH

LED indications

 Ua Ia If Utg


Thyristor commutational module (TKM)

TKM80FCR3F
  • mono- or three-phased in Y or delta configuration
  • analog input for tachogenerators
  • control type:
    • on phase angle
    • skips of half-waves
    • discrete commutation with synchronization
  • galvanically isolated analog input 0-10 VDC or discrete input 10-30 VDC
  • nominal current of 10 up to 500 A
  • voltage supply 380/220 V

user's manual


Current limiter (no-load detector) CL50L

CL50L
  • current input 0-100 mA
  • programmable value for no-load current - up to 50 A
  • initial inactive time - up to 999 s.
  • no-load time period before detection - up to 999 s.
  • dimensions: 96x48 mm
  • voltage supply: 220 VAC, 48-62 Hz

user's manual


Programmable panel meters SC04A | SC104A

SC04A
  • four digit floating point LED display
  • analog input for tachogenerators
  • digital integrator for the input readings
  • dimensions: 48x48 mm (SC04A) | 96x48 mm (SC104A)
  • voltage supply: 220 VAC, 48-62 Hz
  • user's manual

                        SC104A


Programmable process controllers PC104

PC104
  • four digit floating point LED display
  • On/Off and Alarm outputs
  • analog input for tachogenerators, tenso-sensors or magneto-resistive bridges
  • digital integrator for the input readings
  • dimensions: 96x48 mm
  • voltage supply: 220 VAC, 48-62 Hz
  • user's manual


Programmable timers TMR03 | TMR04

TMR03
  • three or four digit floating point LED display
  • time periods from 0.1 sec up to 9999 min
  • standard timers, Standby or Cycle modes
  • optoisolated input 24VDC/10mA
  • output relay non-potential
  • dimensions: 48x48 mm
  • voltage supply: 220 VAC, 48-62 Hz

user's manual

                        TMR04


Digital programmable counters CN6P | CN6S

CN6P
  • six digit LED display with range up to 999999
  • optoisolated counting inputs
  • optoisolated resetting inputs
  • two multifunctional outputs
  • progammable mode of the counter:
    • incrementing and/or decrementing
    • conversion to linear or peripheral length
    • conversion to frequency/revolution meter
    • generator
  • dimensions: 96x48x100 mm
  • voltage supply: 220 VAC, 48-62 Hz
                              CN6S

user's manual


Precise three-phase energy meters ECL4P

ECL4P
  • active, reactive and apparent energy measurement
  • current transformers input range from 5:5 to 5:20000 A
  • Modbus RTU interface to PC or HMI via RS485/RS422
  • non-volatile memory for control parameters and measurement
  • dimensions: 96x48x120 mm
  • power supply 3x220 VAC, 48-62 Hz
  • user's manual


Digital programmable potentiometers CALI03P and remote setpoint modules CS01

CALI03P
  • current 0-20mA or voltage 0-10VDC output with 0.1 % precision
  • master and slave mode of potentiometer
  • option for fixed initial value on powerup
  • remote setting buttons (CS01)
  • dimensions: 48x48 mm on control panel (CALI03P) | 86x70 mm on standard 35 mm DIN rail (CS01)
  • voltage supply: 220 VAC, 48-62 Hz
  • user's manual

e-mail contacts home